產品中心
Product Center
熱門搜索：
SDI-47手動SDI污染指數測定儀
NPW-160在線TP/TN/COD分析儀 可同時測量TP、TN、COD
Labsen 241-6SANXIN 半微量樣品PH電極
GTDO-500PPB在線微量溶氧儀
GT SDI國產SDI污染指數測定儀
GTPH30經濟型便攜式PH測定儀
GTOX-700便攜式微量溶氧分析儀
GTOX-610經濟型便攜式微量溶氧儀
GTCON30便攜式電導率/TDS/鹽度儀
GTDR系列多功能數控消解儀
9385100DR900便攜式多參數水質分析儀
GTAT SDI全自動污染指數測定儀
哈?？偭自噭?/a>
GTPH40臺式pH/ORP計
ZR-3620AZR-3620A小流量氣體采樣器
58700-34PC II硅離子水質分析儀 1-100mg/L SiO2
當前位置：首頁
產品中心水質分析儀器其他水質分析儀及配件法國polymetron配件
法國polymetron配件
產品簡介
product
產品分類| Z545=001=004 | Key for cabinet 9097/9073 |
| Z578=301=038 | Wall through gland for 6mm external diameter tubing |
| Z578=401=501 | Stopper （red） for quick fitting , ø 6mm |
| Z578=507=602 | Set of tools for disconnecting in and out sampling tubes of 9126 PURECAL and tubings on 924x quick fittings |
| Z578=601=703 | Quick fitting for 6mm extrenal diameter tubing |
| Z578=602=703 | Quick fitting for ø 8mm O.D. tubing |
| Z578=603=703 | Quick fitting for 10mm external diameter tubing |
| Z579=034=000 | 3/4" Elbow adaptor in s.steel |
| Z581=000=510 | 2" clamp for 8398,2 |
| Z581=100=510 | 316LSS welding ferrule for 8398,2 |
| Z581=200=500 | 316L SS welding ferrule for 8398,3 |
| Z583=012=012 | Barbed fitting NPT ½" for tubing ½" |
| Z584=024=024 | Union fitting PP for 4mm tubing |
| Z587=004=002 | Adaptor 1/4"’G / DN8 |
| Z587=006=002 | Straight fitting, G1/4" thread - 4/6mm tubing, in PP |
| Z587=006=012 | Fitting PP ¼‘’NPT DN4x6mm |
| Z587=106=002 | 1/4 DN 4/6 elbow fitting |
| Z587=106=012 | Elbow fitting PP ¼’’NPT DN4x6mm |
| Z587=108=002 | Elbow barbed nipple DN 6 G1/4'' in PP |
| Z587=108=012 | Fitting Elbow 1/4"NPT - 6/8mm Tubing, PP |
| Z587=112=003 | 3/8 DN 10/12 elbow fitting |
| Z587=114=003 | Elbow barbed nipple DN 12 G3/8'' in PP |
| Z587=306=001 | TE fitting G1/4" DN 4/6 （x2） in PP |
| Z587=906=002 | Fitting 90° long neck, G1/4" thread - 4/6mm tubing, in PP |
| Z588=003=046 | wall-through fittings PPH DN4/6 |
| Z588=003=068 | wall-through fittings PPH DN6/8 |
| Z588=004=160 | Non rotating panel mount connector DN 1.6 |
| Z588=004=163 | Bulkhead fitting for 1.6 x 3.2 tubing through AutoCal lead's bottle |
| Z588=004=254 | Panel mount fitting DN 2.5 / 4 in PP |
| Z589=010=015 | Fitting for 1.7mm I.D tubing – 10/32’’ thread |
| Z589=010=016 | 1/16 T junction 10-32 polypropylène |
| Z589=010=141 | Calibration solution injection T |
| Z589=011=016 | Straight nipple NPT 1/8 inch in PP |
| Z589=011=040 | Fitting for 4mm I.D tubing – 10/32’’UNF thread in PP |
| Z589=012=040 | Elbow nipple for 8810 dilution system |
| Z590=011=130 | Set of 12 tubes grey-grey black viton |
| Z590=015=150 | TUBE BLACK VITON 1.5/3 mm （per meter） Minimum order of 3 meters |
| Z590=020=038 | Orange/Green ismaprene tube, one piece - "Extended lead-time may occur on this spare-part because the analyser itself was obsolete more than 5 years ago" |
| Z590=020=130 | Grey/grey ismaprene tube, one piece |
| Z590=020=165 | Blue/blue ismaprene tube, one piece |
| Z590=020=185 | Green/green ismaprene tube, one piece |
| Z590=020=206 | Peristaltic pump tube Ismaprene with 3 color coded stopper purple / purple |
| Z590=050=060 | Tubing in PE （low density）, ø 1.6x3.2mm （per meter） |
| Z590=060=026 | Tubing in PTFE , ø 2x6 mm （per meter） |
| Z590=060=080 | PTFE tubing 6/8 mm per meter |
| Z590=121=810 | Tubing, Polyethylene 8 x 10 mm （per meter） |
| Z590=160=030 | Tubing 1.6x3.2mm made of Silicone per meter |
| Z590=160=040 | Silicone tubing 2/4mm per meter |
| Z590=160=080 | Silicone tubing ø 6x8 mm （per meter） |
| Z590=200=046 | Transparent flexible PVC tubing sized 4x6mm （per m） |
| Z590=200=260 | Transparent PVC tubing 20x26mm （per m） |
| Z590=514=200 | Set of 5 peristaltic pump tubing |
| Z590=620=025 | Orange/blue Ismaprene tubes for kit-K, set of 6 pcs |
| Z595=000=001 | Dechlorination cartridge for 8810 METHANOL |
| Z595=000=002 | In-Line filter for tubing 4mm I.D; body made of PP |
| Z595=006=000 | Filter（60µ） for water - High performance （8bars - 40°C） and transparent cartridge holder （made of microcrystallin PP） - Inlet&Oulet quick-connectors （6mmOD） - H（85）Diam.（56） - Dismountable - See filtration cartridge packages at 595=006=9xx |
| Z595=006=005 | Filter（60µ） for water, imperial - High performance （8bars - 40°C） and transparent cartridge holder （made of microcrystallin PP） - Inlet&Oulet quick-connectors （1/4'' OD） - H（85）Diam.（56） - Dismountable - - See filtration cartridge packages at 595=006=9xx |
| Z595=006=906 | Filtration cartridge（60µ） pack （6 per pack） for filter 595=006=0xx |
| Z595=010=000 | Filter（100µ） for water - High performance （8bars - 40°C） and transparent cartridge holder （made of microcrystallin PP） - Inlet&Oulet quick-connectors （6mmOD） - H（85）Diam.（56） - Dismountable - See filtration cartridge packages at 595=010=9xx |
| Z595=010=005 | Filter（100µ） for water, imperial - High performance （8bars - 40°C） and transparent cartridge holder （made of microcrystallin PP） - Inlet&Oulet quick-connectors （1/4'' OD） - H（85）Diam.（56） - Dismountable - See filtration cartridge packages at 595=010=9xx |
| Z595=010=906 | Filtration cartridge（100µ） pack （6 per pack） for filter 595=010=0xx |
| Z596=118=024 | Membrane （spare part） in EPDM （no coating） for sampling electrovalve P/N 689=118=024 |
| Z6001-2400-33 | RD-240 immersion sensor |
| Z6001-2420-00 | RD-242 insertion sensor |
| Z6001-2620-00 | RD-262 insertion sensor |
| Z6010-2000-33 | Interconnect cable for WP242/262 and RD242/262, 33ft with connector. |
| Z6020-0000 | Handrail mounting bracket kit （2） |
| Z6021-0020 | Ball valve for RD 242/262 insertion sensors |
| Z6022-0016 | Wiper assy kit, WP sensors （4 ea） |
| Z6071-2500 | Tx-pro2 / RD user manual, English |
| Z6071-2510 | Tx-pro2 / RD user manual, French |
| Z6071-2520 | Tx-pro2 / RD user manual, German |
| Z6071-2530 | Tx-pro2 / RD user manual, Italian |
| Z6071-2540 | Tx-pro2 / RD user manual, Spanish |
| Z6101-2400 | TxPro-2/RD-240 （1 immersion sensor） including 10 meter （33 ft.） cable |
| Z6101-2420 | TxPro-2/RD242 （1 insertion sensor） including one 10 meter （33 ft.） interconnect cable and one ball valve |
| Z6101-2600 | TxPro-2/RD-260 （1 immersion sensor） including one 10 meter （33 ft.） cable |
| Z6101-2620 | TxPro-2/RD-262 （1 insertion sensor）, one 10 meter （33 ft.） cable and a ball valve |
| Z6201-2400 | TxPro-2/RD-240 （2 immersion sensors） including 10 meter （33 ft.） cable per sensor |
| Z6201-2420 | TxPro-2/RD-242 （2 insertion sensors） including two 10 meter （33 ft.） interconnect cables and two ball valves |
| Z6201-2600 | TxPro-2/RD-260 （2 immersion sensors） including 10 meter （33 ft.） cable per sensor |
| Z6201-2620 | TxPro-2/RD-262 （2 insertion sensors） including two 10 meter （33 ft.） interconnect cables and two ball valves |
| Z621=083=061 | Instruction manual in French for 8361 pH probe |
| Z621=088=110 | Instruction manual in French 8810.1 pH |
| Z621=088=111 | Instruction manual in French 8811 |
| Z621=088=210 | Instruction manual in French 8810.2 ORP |
| Z621=088=310 | Instruction manual in French 8810.3 ISE |
| Z621=088=410 | 8810 METHANOL Instruction manual in French |
| Z621=088=510 | 8810 PO4 colorimetric instruction manual in French |
| Z621=089=020 | Instruction manual in French 8920 |
| Z621=089=021 | Instruction manual in French 8921 |
| Z621=089=064 | Instruction manual in French 8964 |
| Z621=089=065 | Instruction manual French for pH transmitters 8965, 8965Ex |
| Z621=089=130 | Instruction manual in French for pH transmitter 8930 |
| Z621=089=206 | technical note for special firmware version 8920 Cond V6.XX in French |
| Z621=089=207 | Technical note for special firmware version 8920 Cond V7.XX in English |
| Z621=089=209 | Technical note for special firmware version 8920 V9.XX in French |
| Z621=089=214 | Technical note for special firmware version 8921 V4.XX in French |
| Z621=089=217 | Technical note for special firmware version 8920 Cond V7.XX data com. in french |
| Z621=089=303 | Technical note for special firmware version in french for pH transmitter 8930 V3.XX |
| Z621=090=073 | Instruction manual French for 9073 |
| Z621=090=078 | Instruction manual in French 9078 |
| Z621=090=173 | Instruction manual in French for 9073 EDF |
| Z621=183=061 | Instruction manual in english for 8361 pH probe |
| Z621=188=110 | Instruction manual in English 8810.1 pH |
| Z621=188=111 | Instruction manual in English 8811 |
| Z621=188=210 | Instruction manual in English 8810.2 ORP |
| Z621=188=310 | Instruction manual in English 8810.3 ISE |
| Z621=188=410 | 8810 METHANOL Instruction manual in English |
| Z621=188=510 | 8810 PO4 colorimetric instruction manual in English |
| Z621=189=020 | Instruction manual in English 8920 |
| Z621=189=021 | Instruction manual in English 8921 |
| Z621=189=064 | Instruction manual in English 8964 |
| Z621=189=065 | Instruction manual English for pH transmitters 8965, 8965Ex |
| Z621=189=130 | Instruction manual in English for pH transmitter 8930 |
| Z621=189=206 | Technical note for special firmware version 8920 Cond V6.XX in English |
| Z621=189=207 | Technical note for special firmware version 8920 Cond V7.XX in French |
| Z621=189=209 | Technical note for special firmware version 8920 Cond V9.XX in English |
| Z621=189=214 | Technical note for special firmware version 8921 V4.XX in English |
| Z621=189=217 | Technical note for special firmware version 8920 V7.XX data com. in english |
| Z621=189=303 | Technical note for special firmware version in English for ph transmitter 8930 V3.XX |
| Z621=190=073 | Instruction manual in English 9073 |
| Z621=190=078 | Instruction manual in English 9078 |
| Z621=190=097 | Instruction manual in English for 9097 |
| Z621=288=111 | Instr. manual in German 8811 |
| Z621=288=310 | 8810 ISE Instruction manual in German |
| Z621=289=020 | Instruction manual in German 8920 |
| Z621=289=021 | Instruction manual in German 8921 |
| Z621=289=064 | Instruction manual in German for 8964 |
| Z621=289=065 | Instruction manual German for pH transmitters 8965, 8965Ex |
| Z621=289=130 | Instruction manual in German fro pH transmitter 8930 |
| Z621=290=073 | Instruction manual in German for 9073 |
| Z621=290=078 | Instruction manual in German for 9078 |
| Z621=383=040 | Instruction manual in French/English/German for 8340 |
| Z621=383=044 | Instruction manual in French/English/German for 8344 |
| Z621=383=046 | Instruction manual in French/English/German for 8346/8347 |
| Z621=389=021 | Instruction manual in French and English for 8921 CONCENTRATION |
| Z621=389=221 | Instruction manual in German 8921conc |
| Z621=489=065 | Instruction manual Italien for pH transmitters 8965, 8965Ex |
| Z621=490=073 | Instruction manual in Italian for 9073 |
| Z621=490=078 | Instruction manual in Italian for 9078 |
| Z621=997=001 | Installation procedure 8810 in French Ammonia 0-100 mg/l N NH4 |
| Z621=997=002 | Installation procedure 8810 in French Ammonia 0-1 mg/l N NH4 |
| Z621=997=003 | Installation procedure 8810 in French Cyanide 0-1 mg/l CN- |
| Z621=997=004 | Installation procedure 8810 in French Fluoride 0-1000 mg/l F- |
| Z621=997=005 | Installation procedure 8810 in French Nitrate 1-100 mg/l NO3 |
| Z621=997=006 | Installation procedure 8810 in French Calcium 0-500 mg/l CaCO3 |
| Z621=997=007 | Install.procedure 8810 in French Total hardness 0-10 mg/l CaCO3 |
| Z621=997=008 | Install.procedure 8810 in French m and p values 0-500 mg/l CaCO3 |
| Z621=997=009 | Install.procedure 8810 in French Free/total acidity,phosphatizing |
| Z621=997=011 | Installation procedure 8810 in French Accelerator （phosphatizing） |
| Z621=997=013 | Install.procedure 8810 in French Total hardness 0-500 mg/l CaCO3 |
| Z621=997=016 | Install.procedure 8810 in French Chloride O,5-500 mg/l Cl- |
| Z621=997=017 | Installation procedure 8810 in French Sulphide 1-100 mg/l S- - |
| Z621=997=019 | Installation procedure 8810 in French Zinc phosphatizing |
| Z621=997=020 | Installation procedure 8810 in French Chromium VI phosphatizing |
| Z621=997=021 | Installation procedure 8810 in French Sodium hydroxide 0-50 g/l |
| Z621=997=022 | Installation procedure 8810 in French Free hydrosulfite/indigo |
| Z621=997=024 | Install.proced.8810 in French Chlorine high concent.0-3 g/l Cl2 |
| Z621=997=025 | Install. proced. 8810 in French Sulphide 0-1 mg/l S- |
| Z621=997=028 | Install.proced.8810 in French Hydrogen peroxyde 0-20 g/l H2O2 |
| Z621=997=029 | Install.procedure 8810 in French Phosphates 5-100 mg/l P-PO4 |
| Z621=997=030 | Installation procedure PO4 colorimetric in French |
| Z621=997=031 | Installation procedure 8810 Phosphates 0-5 mg/l P-PO4 |
| Z621=997=101 | Installation procedure 8810 in English Ammonia 0-100 mg/l N NH4 |
| Z621=997=102 | Installation procedure 8810 in English Ammonia 0-1 mg/l N NH4 |
| Z621=997=103 | Installation procedure 8810 in English Cyanide 0-1 mg/l CN- |
| Z621=997=104 | Installation procedure 8810 in English Fluoride 0-1000 mg/l F- |
| Z621=997=105 | Installation procedure 8810 in English Nitrate 1-100 mg/l NO3 |
| Z621=997=106 | Installation procedure 8810 in English Calcium 0-500 mg/l CaCO3 |
| Z621=997=107 | Install.procedure 8810 in English Total harness 0-10 mg/l CaCO3 |
| Z621=997=108 | Install.procedure 8810 in English m and p values 0-500 mg/l CaCO3 |
| Z621=997=109 | Instal.procedure 8810 in English Free/total acidity,phosphatizing |
| Z621=997=111 | Install.procedure 8810 in English Accelerator （phosphatizing） |
| Z621=997=113 | Install.procedure 8810 in English Total hardness 0-500 mg/l CaCO3 |
| Z621=997=116 | Install. procedure 8810 in English Chloride 0,5-500 mg/l Cl- |
| Z621=997=117 | Installation procedure 8810 in English Sulphide 1-100 mg/l S- - |
| Z621=997=119 | Installation procedure 8810 in English Zinc phosphatizing |
| Z621=997=120 | Installation procedure 8810 in English Chromium VI phosphatizing |
| Z621=997=121 | Installation procedure 8810 in English Sodium hydroxide 0-50 g/l |
| Z621=997=122 | Installation procedure 8810 in English Free hydrosulfite/indigo |
| Z621=997=124 | Install.proced.8810 in English Chlorine high concent. 0-3 g/l Cl2 |
| Z621=997=125 | Install. proced. 8810 in English Sulphide 0-1 mg/l S- |
| Z621=997=128 | Install.proced.8810 in English Hydrogen peroxide 0-20 g/l H202 |
| Z621=997=129 | Install. procedure 8810 in English Phosphates 5-100 mg/l P-PO4 |
| Z621=997=130 | Installation procedure PO4 colorimetric in English |
| Z621=997=131 | Installation procedure 8810 Phosphates 0-5 mg/l P-PO4 |
| Z621=997=201 | Installation procedure 8810 in German Ammonia 0-100 mg/l N NH4 |
| Z621=997=205 | Installation procedure 8810 in German Nitrate 1-100 mg/l NO3 |
| Z621=997=229 | Installation procedure 8810 Orthophosphat 5-100 mg/l P-PO4 |
| Z621=997=231 | Installation procedure 8810 Orthophosphat 0-5 mg/l P-PO4 |
| Z689=111=041 | 2/2 way solenoid valve （vessel to photometer） |
| Z689=112=031 | 2/2 way solenoid valve inox （24 V rinse water） |
| Z689=118=008 | Solenoid valve （24CC, 2/2way） as per 9210&9211 sample blocks [NPS 0.8 （0.2 - 6 bars）] - Delivered with one connector P/N 350=005=377 - For mounting, see special torx screw driver at P/N 820=000=006 |
| Z689=118=016 | Solenoid valve （24CC, 2/2way, NPS 1.6 （0.2 - 2 bars）） - Delivered with one connector P/N 350=005=377 - For mounting, see special torx screw driver at P/N 820=000=006 |
| Z689=118=024 | Solenoid valve （24CC, 2/2way） as per 9210&9211 overflow vessel （AKA transfer valve） - For connector, see P/N 350=005=377 - For mounting, see special torx screw driver at P/N 820=000=006 |
| Z689=131=020 | Electro-valve for mixed bed |
| Z689=131=030 | 3/2 way valve |
| Z689=132=008 | Solenoid valve （24CC, 3/2way） as per 9245&9240 sample blocks [NPS 0.8 （0.2 - 6 bars）] - For connector , see P/N 09240=A=9172 - For mounting, see special torx screw driver at P/N 820=000=006 |
| Z689=132=024 | Solenoid valve （24CC, 3/2way） as per 9245&9240 over-flow-vessel （AKA conditioning valve） - For connector, see P/N 09240=A=9171 - For mounting, special torx screw driver at P/N 820=000=006 - |
| Z694=000=001 | 9186 flowmeter 0-16l/h with adjustment valve |
| Z694=000=002 | Flowmeter without connection adapters |
| Z695=004=003 | Volumetric pump for 8810 |
| Z695=004=004 | Pump 24VDC, membrane, 0.1L/mn, for 921x-calibration/flush pump , for 924x-flush pumpCalibration / flush pump |
| Z695=004=006 | Gas-pump 80V , （highly resistant to aggressive vapor of DIPA） |
| Z695=114=000 | Micro-pulses pump for Auto-calibration |
| Z695=114=005 | Micro-pulses pump for regeneration |
| Z696=038=112 | NO 2/2 way solenoid valve （sample） |
| Z696=046=001 | Needle valve |
| Z696=146=001 | Flow adjustment valve |
| Z697=000=001 | Stop valve for pH/ORP autocal pump |
| Z810=001=029 | Zinc （1 Kg） for 8893 |
| Z820=000=006 | Elbow torx screw driver T6 |
上一個：
返回列表
